User Manual
ManualsBrandsStartech ManualsDisplays & ProjectorsStarTech.com Desk Mount Monitor Arm, VESA or Apple iMac/Thunderbolt Display up to 14kg, Articulating Height Adjustable Single Desktop Monitor Pole Mount, Desk Clamp or Grommet, Silver Small Footprint Design - mounting kit - adjustable arm - for Monitor -
Table Of Contents
- Compliance Statements
- Warning Statements
- Safety Statements
- Product Diagram
- Product Dimensions
- Product Rotation
- Product Information
- Specifications
- Package Contents
- Installation
- Using the Grommet Mount
- Using the C-Clamp
- Mounting the Monitor Arm
- Attaching a Monitor Using the VESA Mount
- Attaching an iMac Monitor
- Attaching the Monitor Mount
- Removing the Monitor Mount
- Adjusting the Monitor Tilt
- Routing the Cables
20
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attaching an iMac Monitor
1. Turn o the iMac Monitor and disconnect all cables
connected to the back of the iMac Monitor.
2. Turn the iMac Monitor around so that the back is facing
forward.
3. Tilt the top of the iMac Monitor forward.
4. Insert the Access Card into the slot at the top of the
Monitor Stand, disengaging the locking mechanism.
Notes: The Access Card needs to be on a slight upward
angle and will need to go into the slot approximately 3/4 of
an inch order to disengage the locking mechanism.
Only the Access Card should be used to disengage the lock-
ing mechanism.
Tilt the iMac Monitor and Insert the Access Card