User Manual
ManualsBrandsStartech ManualsDisplays & ProjectorsStarTech.com Desk Mount Monitor Arm, VESA or Apple iMac/Thunderbolt Display up to 14kg, Articulating Height Adjustable Single Desktop Monitor Pole Mount, Desk Clamp or Grommet, Silver Small Footprint Design - mounting kit - adjustable arm - for Monitor -
Table Of Contents
- Compliance Statements
- Warning Statements
- Safety Statements
- Product Diagram
- Product Dimensions
- Product Rotation
- Product Information
- Specifications
- Package Contents
- Installation
- Using the Grommet Mount
- Using the C-Clamp
- Mounting the Monitor Arm
- Attaching a Monitor Using the VESA Mount
- Attaching an iMac Monitor
- Attaching the Monitor Mount
- Removing the Monitor Mount
- Adjusting the Monitor Tilt
- Routing the Cables
13
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
2. Use a Phillips Screwdriver (not included) to remove the
Screw from the Plate on the C-Clamp.
3. Remove the Plate, Two Washers, and the Knob from the
bottom of the C-Clamp.
Removing the Plate from the C-Clamp
4. Position the Support Pole over the Grommet Hole.
5. Slide the Plate (removed in step 3) through the Threaded
Rod on the Knob.
6. Place the Knob through the Grommet Hole in the desk or
table and into the Support Pole.
7. Turn the Knob clockwise to tighten it.