Manualshelf

User Manual

ManualsBrandsStartech ManualsDisplays & ProjectorsStarTech.com Desk Mount Monitor Arm with 2x USB 3.0 ports, Pole Mount Full Motion Single Arm Monitor Mount up to 17.6lbs/8kg VESA Display, Ergonomic Articulating Monitor Arm, Clamp/Grommet Small Footprint Design - mounting kit - for Monitor - black
31323334353637383940
34
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
4. Align the Screw Holes on the VESA Mount with the VESA
Mounting Holes on the back of the Monitor. The VESA
Mount can support a 75 x 75 or 100 x 100 mounting pattern.
Note When attached, the Arrow on the VESA Mount
should be pointing toward the top of the Monitor.
Aligning the VESA Mount with Monitor
5. Select the appropriate hardware for mounting the VESA
Mount to the back of the Monitor either M4 x 12 mm, M5 x
12 mm, or customer sourced screws.
6. Insert the appropriate Screws through the Screw Holes on
the VESA Mount and into the VESA Mounting Holes on the
back of the Monitor.
7. Using a Phillips Head Screwdriver (or appropriate
screwdriver) tighten the screws.
Note: Do not over-tighten the Screws. If you encounter re-
sistance while you’re tightening the Screws, stop tightening.
Failure to do so could result in damage to the Monitor.