User's Manual
Table Of Contents
17
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
6. Person two: Tighten the Height-Adjustment Knob on each
of the VESA Mounts.
Adjust the Swivel
ARMDUOVS comes ready for swivel adjustments. Your Monitors
can easily be adjusted by swivelling the Monitors from
side to side. To increase or reduce the tension for the swivel
adjustment, follow these steps:
1. Remove the Cap located on the VESA Mount to reveal the
4 mm Hex Screw. The Cap is located above the Cable-
Management Hook. (Figure 12)
2. Loosen the 4 mm Hex Screw.
3. Swivel the Monitor to the desired position.
4. Tighten the 4 mm Hex Screw using the 4 mm Hex Key.
Note: Do not over-tighten the 4 mm Hex Screws.
Figure 12