Manualshelf

User Manual

ManualsBrandsStartech ManualsAccessoriesStarTech.com Vertical Dual Monitor Stand, Ergonomic Desktop Stacked Two Monitor Stand up to 27 inch VESA Mount Displays, Free Standing Universal Monitor Mount, Height Adjustable, Silver Double Monitor Holder - stand - for 2 monitors - black, silver
20212223242526272829
Table Of Contents
14
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
8. Use a Phillips Screwdriver to tighten all of the Screws.
Warning! Do not over-tighten the Screws. If you encounter
resistance while you’re tightening the Screws, stop tighten-
ing. Failure to do so could result in damage to the Monitors.
9. Tighten the Height-Adjustment Knob on each of the VESA
Mounts. (Figure 10)
Note: The Height-Adjustment Knob has a ratchet feature.
Freely rotate the Height-Adjustment Knob by pulling it
away from the VESA Mount and rotating it to the desired
position.
10. Slide the Collars up the Lower and Upper Poles so that
each Collar sits ush with the corresponding VESA Mount.
11. Tighten the two Flat-Head Screws that are located on each
Collar, using the 3 mm Hex Key with Screwdriver Tip.
14
Figure 10