User Manual
ManualsBrandsStartech ManualsDisplays & ProjectorsStarTech.com Desk Mount Dual Monitor Arm, Premium Articulating Monitor Arm, up to 27" VESA Mount Displays, Height Adjustable Monitor Mount, Rotating/Swivel/Tilt, Desk Clamp/Grommet, Silver Easy & Quick Assembly - mounting kit - adjustable arm - for 2 LCD
Table Of Contents
- Compliance Statements
- Warning Statements
- Safety Statements
- Product Diagram
- Product Dimensions
- Product Dimension
- Product Information
- Specifications
- Package Contents
- Installation
- Using the Grommet Mount
- Using the C-Clamp
- Attaching the Monitor Mount
- Attaching a Monitor Using the VESA Mount
- Attaching the Monitor Mount
- Removing the Monitor Mount
- Adjusting the Monitor Tilt
- Routing the Cables
24
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Adjusting the Monitor Tilt
• While supporting the weight of the Monitor, use the Hex
Key (included) to loosen or tighten the Hex Screw on the
side of the Monitor Mount, until the tension can hold the
weight of the Monitor but it is still adjustable.
Note: The screw cap located on the opposite side of the Hex
Screw is not used for tilt adjustments.
Routing the Cables
The Desk Mount comes with a Cable-Management System
that can be used to run the monitor cables down the mounting
arms.
Note: Make sure that the cables are unplugged before you
route them through the Cable-Management System.
1. Thread the Cable through the hole in the Swivel Arm.
2. Run the Cable through the Cable-Management Clip on the
side of the Support Pole.
3. Repeat steps 1 - 2 for any additional monitors.