User Manual

Instruction manual
15
Disassemble the ARMDUAL30
1. Remove the thumbscrews (8) from the back of the monitors and the monitor
mounts (7).
Warning! Make sure that you lift the mounting arm up to its highest position when
you remove the monitor. When you remove the weight of the monitor, the arm could
bounce upward and cause injury.
2. To remove the monitor mounts and mounting arms, slide the textured button away
from you on each of the mounts and arms and lift them up (gure 33).
3. Pull the mounting arm and the dual mount (if used) free from the pole.
4. To loosen the tension of the cable manager (9), pull out the lever and turn the knob
counterclockwise, and remove the cable manager from the pole.
5. Remove the base of the ARMDUAL30 from the table or desk that it was attached to.
gure 33
Cable manager
Swivel arm
Spring arm
Monitor mount