Manualshelf

User Manual

ManualsBrandsStartech ManualsDisplays & ProjectorsStarTech.com Desk Mount Dual Monitor Arm, up to 30" VESA Mount Displays, Height Adjustable Monitor Mount, Horizontal or Vertical Setup, Premium Easy & Quick Assembly - mounting kit - full-motion - for LCD display - black, silver
10111213141516171819
Table Of Contents
Instruction manual
14
3. Repeat step 2 for any additional monitors that you’re attaching.
4. If the monitor doesn’t stay in place or the movement is sti, do one of the following:
• To increase the tension, use the M3 Allen key (3) to turn the screws in the monitor
mount clockwise (gure 31).
• To decrease the tension, use the M3 Allen key to turn the screws in the monitor
mount counterclockwise (gure 31).
gure 31
Monitor mount
M3 Allen key
Route the monitor cables
The ARMDUAL30 comes with a cable manager that you can use to direct the monitor
cables down the mounting arms and out of your working area.
Make sure that the cables that you’re routing are unplugged before you complete the
following steps.
1. Run the cable along the spring arm (5) and through the cable manager depression
on the underside of the spring arm (gure 32).
2. Thread the cable through the hole in the swivel arm (6) (gure 32).
3. Run the cable through the cable manager (9) on the side of the mounting pole
(gure 32).
4. Repeat the steps for any additional monitors that you attached to the ARMDUAL30.
gure 32
Cable manager
Swivel arm
Spring arm