User Manual

Instruction manual
13
Attach the monitors
If you’re positioning the monitors side-by-side, the maximum recommended size of
monitors that you can use is 30 inches.
Warning! Each of the spring arms has factory-set tension to support monitors that
weigh between 2.5 and 4.5 kg. If you attach a monitor that weighs less than 2.5 kg or
more than 4.5 kg, you will need to adjust the monitor mount.
1. If you attach a monitor that weighs less than 2.5 kg or more than 4.5 kg, do one of
the following:
• To decrease the weight capacity of the monitor mount, use the M6 Allen key (2)
and turn the screw in the spring arms (5) clockwise.
• To increase the weight capacity of the monitor mount, use the M6 Allen key (2)
and turn the screw in the spring arms (5) counterclockwise (gure 29).
Tip: The spring arms have positive and negative symbols next to the screw to remind
you which way to turn the M6 Allen key.
gure 29
M6 Allen key
Spring arm
2. Insert four thumbscrews (8) through the holes on the VESA monitor mount (7) and
into the back of the monitor that you’re mounting (gure 30).
Warning! When you attach the monitor mounts to your monitors, make sure that you
don’t scratch the monitors in the process.
gure 30
Thumbscrew
Monitor mount