User Manual

Instruction manual
11
gure 21
gure 22
M3 Allen key
M3 Allen key
Cable
manager
Use the dual mount to attach the monitor arms
You can customize the ARMDUAL30 by changing the order in which you assemble
the monitor arms or by using just the swivel arms or the spring arms. You can also
assemble one set of monitor arms in one conguration and assemble the other set in a
dierent conguration.
1. To loosen the tension of the cable manager (9), pull out the lever and turn the knob
counterclockwise (gure 23).
gure 23
Cable manager
2. Slide one of the cable managers over the pole and move the cable manager to the
height that you want the monitor arms to be at.
3. Push the lever closed and turn the knob clockwise to tighten the cable manager
until it doesn’t move up or down on the pole.
4. Slide the dual mount (10) down the pole until it’s sitting on the cable manager
(gure 24).
gure 24
Dual mount
Cable manager