User Manual

Instruction manual
9
6. If necessary, use the M3 Allen key (3) with the dual mount to increase or decrease
the swing tension of the swivel arms (gure 15).
Tip: Place the M3 Allen key into the holder on the cable manager so that you don’t lose
it when it’s not in use (gure 16).
gure 17
gure 16
gure 15
M3 Allen key
Cable
manager
Dual mount
M3 Allen key
Swivel arm
Spring arm
7. Snap the spring arms (5) onto the swivel arms (gure 17).
Stack the monitors vertically
There are two ways that you can assemble the ARMDUAL30 so that the monitors are
positioned vertically:
• Attach the monitor arms without the dual mount.
• Use the dual mount to attach the monitor arms and assemble the spring arms
below the swivel arms.
Warning! Do not attach more than two monitor arms together. The ARMDUAL30 is
designed to only support two horizontal pieces (spring or swivel arms).
Attach the monitor arms without using the dual mount
1. To loosen the tension of the cable manager (9), pull out the lever and turn the knob
counterclockwise (gure 18).