User Manual

Instruction manual
8
Attach the monitor arms
Set up the monitors side-by-side
Note: If you want to position your monitors side by side at exactly the same height, use
the dual mount to attach the monitor arms. Using the dual mount adds approximately
two inches of distance between the two monitors.
1. To loosen the tension of the cable manager (9), pull out the lever and turn the knob
counterclockwise (gure 12).
gure 12
gure 13
Cable manager
Cable manager
Dual mount
2. Slide one of the cable managers over the pole and move the cable manager to the
height that you want the monitor arms to be at.
3. Push the lever closed and turn the knob clockwise to tighten the cable manager
until it doesn’t move up or down on the pole.
4. Slide the dual mount (10) down the pole until it’s sitting on the cable manager
(gure 13).
5. Snap the swivel arms (6) onto the dual mount (gure 14).
gure 14
Dual mount
Swivel arm