Technical Specs

Instruction manual
10
gure 18
Cable manager
2. Slide one of the cable managers over the pole and move the cable manager to the
height that you want the monitor arms to be at.
3. Slide one of the swivel arms (6) down the pole until it’s sitting on the cable manager
(gure 19).
gure 20
Swivel arm
Spring arm
gure 19
Swivel arm
Cable manager
4. Slide the second cable manager down the pole so that it’s sitting on the rst swivel
arm.
5. Slide the second swivel arm down the pole so that it’s sitting on the second cable
manager.
6. Snap the spring arms (5) onto the swivel arms (gure 20).
7. If necessary, use the M3 Allen key (3) to increase or decrease the swing tension of
the arms (gure 21).
Tip: Place the M3 Allen key into the holder on the cable manager so that you don’t lose
it when it’s not in use (gure 22).