User Manual
Table Of Contents
13
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
If the Mounting Surface’s thickness is between 10 mm - 50
mm:
4. Align the two upper Screw Holes on the Upper Desk Clamp
with the two Screw Holes on the Lower Desk Clamp.
5. Insert the two Desk Clamp Screws through the Screw
Holes on the Upper Desk Clamp and into the Screw Holes
on the Lower Desk Clamp.
6. Using the 4 mm Hex Key, tighten the two Desk Clamp
Screws. Being careful not to over-tighten the Desk Clamp
Screws.
C-Clamp Assembly