User Manual
Table Of Contents
- Warning Statements
- Product Diagram
- Product Dimensions
- Product Information
- Package Contents
- Product Specifications
- Requirements
- Mounting the Monitor Arm Using the C-Clamp
- Using the Grommet Mount
- Attaching the Monitors (Flush)
- Attaching the Monitors (Recessed)
- Mounting the Monitors
- Adjusting the Monitors
- Tilt Adjustment
- Micro Adjustments
- Routing the Cables
28
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Mounting the Monitors
1. While supporting the weight of the Monitor, slide the VESA
Mount down onto the Swivel Arm Assembly, aligning the
hole on the Mounting Flange (located on the VESA Mount)
with the Micro-Adjustment Screw Protrusion on the
Monitor Holder.
Installing the Monitors
2. When the Mounting Flange on the VESA Mount is sitting
on the Micro-Adjustment Screw Protrusion, mount
the Micro-Adjustment Knob on the top of the Micro-
Adjustment Screw Protrusion.
3. Insert the Micro-Adjustment Screw through the center
of the Micro-Adjustment Knob and into the Micro-
Adjustment Screw Protrusion.