User Manual
Table Of Contents
- Warning Statements
- Product Diagram
- Product Dimensions
- Product Information
- Package Contents
- Product Specifications
- Requirements
- Mounting the Monitor Arm Using the C-Clamp
- Using the Grommet Mount
- Attaching the Monitors (Flush)
- Attaching the Monitors (Recessed)
- Mounting the Monitors
- Adjusting the Monitors
- Tilt Adjustment
- Micro Adjustments
- Routing the Cables
25
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
2. Lay the Monitor face down on a at, level surface.
3. Align the Mounting Holes on the VESA Mount with the
Screw Holes on the back of the Monitor, making sure that
the Mounting Flange on the VESA Mount is at the top.
4. Align the Washers (x 4) with the Mounting Holes on the
VESA Mount.
5. Insert the Screws (x 4) through the Washers and Mounting
Holes and into the Screw Holes in the back of the Monitor.
Installing the VESA Mount
6. Using a Phillips Head Screwdriver (sold separately) tighten
the Screws, being careful not to over-tighten.