User Manual

Instruction manual
15
Adjust the tilt angle of your monitor
1. To change the angle that a monitor is tilted at, use the 6 mm hex key to turn the
screw in the side of the VESA monitor mount counterclockwise.
2. When the screw is loose, position the monitor at the angle that works best for you.
3. Use the 6 mm hex key to turn the screw clockwise to tighten it. (gure 14)
+45°
-45°
6 mm hex key
gure 14
4. When you’re done adjusting the tilt angle, you can store the 5mm hex key and the
6 mm hex key in the hex key holder in one of the cable-management clips.
(gure 15)
gure 15
Hex key holder