User Manual

Instruction manual
12
3. Carefully hook the screws into the top two slots on the VESA monitor mount on the
upper pole. (gure 10)
gure 10
Monitor
M4x12 mm screw
or
M5x12 mm screw
VESA monitor mount
4. Use a Phillips screwdriver to tighten the screws. (gure 11)
Caution! If the VESA monitor mount starts to slip down the upper pole when you add
the weight of the monitor, remove the monitor and use the 5 mm hex key to tighten
the screw in the side of the VESA monitor mount. When the screw is tightened, repeat
step 3 to reattach the monitor.
Warning! Do not over-tighten the screws. If you encounter resistance while you’re
tightening the screws, stop tightening. Failure to do so could result in damage to the
monitor.
gure 11