User Manual

User Manual
9
6. Remove the backing from the ve Rubber Pads and attach them underneath the
top of the Desk-Mount Clamp, on the surface touching the table. (Figure 6)
7. Turn the knob on the Desk-Mount Clamp counterclockwise until it reaches the
thickness of the Desk.
Note: The Desk-Mount Clamp can accommodate a Mounting Surface that is
between 10 and 80 millimeters (0.4 and 3.1 inches) thick.
8. Slide the Desk-Mount Clamp over the edge of the Mounting Surface (Figure 7).
9. Turn the Knob clockwise to tighten the Desk-Mount Clamp.
Figure 7
Desk-Mount
Clamp
Knob
Figure 6