User Manual

5
English
WARNING
Risk From Unintended Use and Handling. Please take care to follow these guidelines to
avoid risks to people or property.
- Do Not tamper with or modify this product in any way.
- This heater is not intended for use in bathrooms, laundry areas and similar indoor locations.
Never locate heater where it may fall into bathtub, swimming pool or other water container.
- Do Not run cord under carpeting. Do not cover cord with throw rugs, runners or similar
coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic
area and where it will not be tripped over.
- Do Not operate any heater with a damaged cord or plug after the heater malfunctions
or has been dropped or damaged in any manner. Discard heater or return to authorized
service facility for examination and/or repair in order to avoid a hazard.
- Do Not attempt to repair or replace parts.
DANGER
Risk From Electrical Shock. Contact with wires or components that are under voltage
could be potentially fatal!
- Do Not use this product outdoors or expose it to weather or elements.
- Do Not use this product on wet surfaces, in bathtub or shower.
- Do Not immerse this product in water or allow water to drip into the motor housing.
- Do Not use this product if it has a damaged power cord or plug. If the power cord is
damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
- To reduce the risk of fire or electrical shock, do not use this product with any solid-state
speed-control device.
- Do Not stretch the power cord or put the cord under strain.
- Do Not insert or allow foreign objects to enter any input or output opening as this may
cause risk of electric shock or fire or damage the product.
- This product is equipped with a 3-prong plug, with a grounding pin as a safety feature. To
reduce the risk of electric shock, this plug is intended to connect to properly grounded
outlets only. This plug will fit into a grounded outlet only one way. Do not alter the plug. Do
not attempt to defeat this safety purpose of the grounding plug.