Manualshelf

User Manual

ManualsBrandsStarTech ManualsHubs & SwitchesStarTech.com 4 Port USB VGA IP KVM Switch with Virtual Media - 4 Port Remote KVM over IP (SV441DUSBI) - KVM switch - 4 x KVM port(s) - 1 local user - 1 IP user - desktop - for P/N: RACKCOND17HD, RKCONS1701, SVA12M2NEUA, SVA12M5NA
12345678910
Instruction Manual
4
Installation
Device Connection
1. Connect the USB keyboard, mouse, and VGA monitor to the console connectors on
the IP KVM Switch.
2. Connect a Cat5 Ethernet cable to the LAN port.
3. Power up the monitor followed by the IP KVM Switch. The IP-OSD menu should
come up automatically. Follow the on-screen instructions to nish the initial setup.
Initial Power-Up
You must power up the IP KVM Switch with a keyboard, mouse, and monitor
connected before turning on any other devices (i.e. Slave KVMs, computers).
Ensure that the devices you are connecting are powered o before connecting them
to the unit.
Operation
Initial IP-OSD Setting
Power on the monitor and the IP KVM Switch. The IP-OSD menu will automatically
appear. Follow the on-screen instructions to complete the initial setup.
Press the <Enter> key to enter the Advanced
Settings Menu. Once the desired settings have
been achieved, press <ESC> to close the Menu.
It is recommended that you change the
password immediately and make a note of it.
*screenshots are for reference only