Quick Start User Manual

Instruction Manual

Firmware

For optimal operation we recommend updating your rmware to the latest version

(2.0.2). There are three possible rmware versions that may be loaded on your

WIFI2HDMC/WIFI2HDMCGE (1.6.5 / 2.0.0 / 2.0.2). Please follow the below steps to

identify your current rmware version, and update your rmware if required.

Identify Your Current Firmware Version

1. Follow Hardware Installation to display the primary launch page on your HDMI-

enabled display device.

Note: The primary launch page may vary depending on your rmware version.

2. Identify and take note of your rmware version.

a) If your WIFI2HDMC/WIFI2HDMCGE has rmware versions 1.6.5 or 2.0.0 installed,

your rmware version will be displayed in the bottom right-hand corner.

b) If your WIFI2HDMC/WIFI2HDMCGE has rmware version 2.0.2 installed, your

rmware version will be displayed on the secondary launch page. (Press the mode

select button once on the WIFI2HDMC/WIFI2HDCMGE to switch to the secondary

launch page).