Manual

Instruction Manual
9
Set the Auto Scan Time Interval
Step 1
Press 3 and 4 at the same time.
Step 2
All four LEDs should be blinking. Press one to set the auto scan time interval.
• 1 represents 8 seconds
• 2 represents 15 seconds
• 3 represents 30 seconds
• 4 represents 45 seconds
Reset the Unit to its Default Settings
1. Power o the Video Matrix Switch.
2. Press and hold Option.
3. Power on the Video Matrix Switch.
4. Press 1 to reset everything back to the default settings.