USB Ethernet Network Device Server - 4 Ports USB4000IP
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Instruction Manual Table of Contents Introduction ................................................................................... 1 Features.......................................................................................1 Package Contents........................................................................1 Installation Instructions................................................................. 2 Installing the USB Server Hardware.............................................
Instruction Manual Introduction Thank you for purchasing a StarTech.com USB4000IP USB Ethernet Network Device Server - 4 Ports. This convenient unit allows you to share USB devices over a network/IP so they can be accessed on multiple computers. The USB4000IP also enables you to connect printers, scanners, card readers, external drives and more. Reach your USB devices from anywhere on your LAN. Now you can take full advantage of CAT5 cable lengths and the convenience of USB devices in all-in-one solution.
Instruction Manual Installation Instructions Installing the USB Server Hardware Note: Do not connect your USB device(s) to the USB Server until you have finished installing the USB Server software and hardware! Step 1 - Connect the USB Server to Your Network First connect one end of an ethernet cable to the USB Server’s Ethernet port, and the other to your network. This can be a free Ethernet port on your DSL router, Ethernet hub, or WiFi router.
Instruction Manual Installing the Server Utility Software The following instructions outline the installation of th eserver Utility software for all versions of Windows operating systems. Although screen shots of the Server Utility software may not match your operating syustem, please note that the button, menu, and tab names are all identical on both platforms. Step 1 - Insert the USB Server CD-ROM Turn your computer ON and place the USB Server CD into the CD-Rom drive.
Instruction Manual During and/or after the software installation, the Windows New Hardware Wizard may ask you to install software several times. Select ‘Install the software automatically’ and click next until the New Hardware Wizard completes the installation. NOTE: You will not be able to use your USB Server until you complete the New Hardware Wizard process. Step 2 - Running the PhoenixBridge2 Server Utility Application Once the installation is complete, click the PhoenixBridge2 icon on the desktop.
Instruction Manual Using Your First USB Device Step 1 - Connecting a USB Device to the USB Server Once a USB device is connected to the USB Server, open the PhoenixBridge2 Server Utility. You will see the names of USB devices listed in this application.
Instruction Manual Step 2 - Connecting a USB Device To connect a USB device to your computer via the USB Server, select the USB device then click Connect under the device list as shown below: Step 3 - Disconnecting USB Devices When finished using a USB device, you must disconnect it from your computer before it is available to everyone else on the network. To do this, open the Keyspan Server Utility application, select your USB device, then click the red Disconnect icon.
Instruction Manual Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a one year warranty. In addition, StarTech.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.
