USB2VGAMM6 Instruction Manual USB to VGA Video Adapter 6ft. USB 2.0 to VGA External Multi Monitor Video Adapter Cable - Male/Male *Please ensure that the driver installation is complete prior to the physical installation of the USB 2.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction...................................................................... 1 Packaging Contents.....................................................................1 System Requirements..................................................................1 Installation........................................................................ 1 Windows 2000/XP/Vista...............................................................1 Mac OS X...................................................
Introduction Packaging Contents • 1 x USB2VGAMM6 video adapter • 1 x Driver CD • 1 x User Manual System Requirements • Processor: 1.2GHz or higher clock speed • RAM: 512MB or higher • 30MB of available disk space • An available USB 2.0 port • VGA capable monitor • CD/DVD-ROM drive (driver installation) • Microsoft Windows® 2000/XP(32-bit)/Vista(32/64-bit) or Mac OS® 10.4/10.5 Installation * Please ensure that the driver installation is complete prior to the physical installation of the USB 2.
3. When the End User License Agreement appears, please read and accept it, then click Next. 4. Please wait while the installation package copies the necessary files. 5. Once the installation is complete, click the Restart button. The computer will automatically reboot, so please make sure to close/ save any files/programs you have opened before pressing the button. 6. After Windows has loaded, plug in the USB2VGAMM6 adapter to the computer. Windows should start to automatically load the drivers.
Mac OS X (For Intel-based Mac computers only) 1. Insert the Driver CD (included) into the CD/DVD-ROM drive. 2. Browse through the Driver CD and locate the “DisplayLink-OSX” .dmg file. Double-click on this file to begin the installation process: 3. Double Click the “DislpayLink Software Installer.pkg” to install the software. 4. Once the installation is complete, click the “Restart” button.
Configuration Windows 2000/XP/Vista To configure the image being displayed by the monitor that is connected to USB2VGAMM6, right-click on a blank section of the desktop, select Properties, then click on the Settings tab to display the following screen: For Vista, right-click on a blank section of the desktop and select Personalize, then select Screen Resolution on the next screen.
Configure the secondary display by selecting it from the dropdown menu, then adjusting the desired settings: Using the Second Display in Extended Mode In Extended Mode, the monitor that is connected to USB2VGAMM6 creates an extension of the Windows Desktop displayed on the primary monitor.
Here, you can set the secondary display to act as an extension of the primary desktop, or as a mirror image that duplicates the contents on the primary display. Similarly, the screen resolution, color quality, position of the screen and rotation of the screen can be adjusted from this menu. To disable the secondary display, select Off.
Using the Adapter in Extended or Mirror Mode By default the USB2VGAMM6 will be setup as an extended display. To change the display as a mirrored/cloned display, check the “Mirror Display” box on the “Arrangement” page for that monitors Displays settings window. To return the monitor to an extended display, uncheck this option.
Configuring Displays from the Menu Bar If you have checked the “Show displays in menu bar” in the Display Preferences window, then you can configure displays by clicking the display icon in the menu bar. This will show a menu similar to the following: Media Playback Please note that while operating in Extended Mode, USB2VGAMM6 can display media files and DVDs using a broad variety of media players, however in Clone Mode, limited support is available for video playback.
Specifications Bus Interface USB 2.0 1x USB type A Connectors 1 x DE-15 VGA male Video Signal VGA (analog) Cable Length 6ft. Built in Memory 16MB Maximum Number of Adapters 5 (Windows) 4 (Mac OS X) Compatible Operating Systems Windows 2000/XP(32-bit)/ Vista(32/64-bit), Mac OS 10.4/10.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a one year warranty. In addition, StarTech.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.
