Instruction manual

10
To use both extended and mirrored displays simultaneously, turn off mirroring then in the
“Arrangement” page press and hold the ‘cmd’ and ‘alt’ keys and drag and drop the display
you wish to mirror over the primary display (shown with the white bar).
Repeat this with each display you wish to mirror, all others will act as an extended
display.
Changing the Primary Display
You can change which display is the primary display by moving the Menu Bar between
displays. Changing the primary display affects where new windows appear and the
position of the Dock.
To move the Menu Bar, click the white menu bar and drag it to the display you wish to
become the primary.
Configuring Displays from the Menu Bar
If you have checked the “Show displays in menu bar” in the Display Preferences window,
then you can configure displays by clicking the display icon in the menu bar. This will
show a menu similar to the following:
Media Playback
Please note that while operating in Extended Mode, the USB video adapter can display
media files and DVDs using a broad variety of media players, however in Clone Mode,
limited support is available for video playback.
Audio Playback
The audio component of the USB video adapter adds a new USB sound device to the
system. This will be selected by default, but on some system it may need to be selected
manually through the Sound Preferences in System Preferences. Audio will only be
passed through the converter to the display. Any speakers connected directly to the
computer system will not be active, while audio is being sent to the USB video adapter.
If multiple USB video adapters are connected to the computer system, only one audio
device can be used. So audio can only be output to one of the USB video adapters.