USB2HDMI Instruction Manual USB to HDMI Video Adapter USB 2.0 to HDMI External Multi Monitor Video Adapter with Audio Manual Revision:11/08/2010 For the most up-to-date information, please visit www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction............................................................................................... 1 Packaging Contents.................................................................................................. 1 System Requirements............................................................................................... 1 Top View.................................................................................................................... 2 Rear View............
Introduction The USB2HDMI USB HDMI External Dual or Multi Monitor Video Adapter (with Audio) turns an available USB 2.0 port into an HDMI output with high resolution video support (up to 1920x1080) and audio. The USB HDMI video adapter can be used to mirror your primary desktop, showing the same image on each display, or to extend your desktop to double your workspace and increase your productivity.
Top View Rear View 2
Installation Please note: The following installation steps must be completed prior to connecting USB video adapter to the host computer, to ensure proper functionality. Windows 2000/XP/Vista/7 1. Insert the Driver CD (included) into the CD/DVD-ROM drive. 2. AutoPlay should launch a Window, giving the option to install the drivers. If AutoPlay is not enabled, browse through the Driver CD and locate the “Setup.exe” file in the USB 2.0 to HDMI folder.
. In the left pane of the Computer Management window, click on Device Manager. 8. In the right pane of the Computer Management window, click on Universal Serial Bus Controllers, and ensure that the USB display adapter device is listed underneath. 9. If you wish to add additional USB video adapters, simply plug them into available USB 2.0 ports. A maximum total of 6 USB video adapters can be used on a computer. Mac OS X (10.4.11/10.5.6) 1. Insert the Driver CD (included) into the CD/DVD-ROM drive. 2.
Configuration Windows 2000/XP/Vista/7 To configure the image being displayed by the monitor that is connected to the USB video adapter, right-click on a blank section of the desktop, select Properties, then click on the Settings tab to display the following screen: For Vista, right-click on a blank section of the desktop and select Personalize, then select Screen Resolution on the next screen. For Windows 7, simply right-click and select Screen Resolution.
Using the Second Display in Extended Mode In Extended Mode, the monitor that is connected to the USB video adapter creates an extension of the Windows Desktop displayed on the primary monitor.
Similarly, the screen resolution, color quality, position of the screen and rotation of the screen can be adjusted from this menu. To disable the secondary display, select Off. Screen Rotation Will rotate the entire video output in 90 degree increments. Media Playback Please note that while operating in Extended Mode, the USB video adapter can display media files and DVDs using a broad variety of media players, however in Clone Mode, limited support is available for video playback.
Fit to TV When using Extended Mode, if the Windows Desktop screen is not completely visible on the TV/Monitor, this option can be used to adjust the size of the Windows Desktop. NOTE: This mode will only work while using Extended mode. If using Mirror mode, this will automatically change the adapter to Extended mode. This mode cannot be used at the same time as the Screen Rotation feature. A red border will appear on the Extended screen that will show the size of the new Windows Desktop.
Mac OS X (10.4.11/10.5.6) To configure the display settings and monitor positions, bring up the Displays Preferences from the System Preferences menu: The Display settings for each display will appear on the individual monitors themselves. To configure them all from a single location, press the “Gather Windows” button and each screen’s Displays Preferences windows will appear on that display. All supported video resolutions will appear in the list on the left side.
To use both extended and mirrored displays simultaneously, turn off mirroring then in the “Arrangement” page press and hold the ‘cmd’ and ‘alt’ keys and drag and drop the display you wish to mirror over the primary display (shown with the white bar). Repeat this with each display you wish to mirror, all others will act as an extended display. Changing the Primary Display You can change which display is the primary display by moving the Menu Bar between displays.
Specifications Bus Interface USB 2.0 Video Signal HDMI 1.2 (digital) Chipset ID DisplayLink DL-165 1 x HDMI female Connectors 1 x USB mini-B female LEDs 1 x Power Maximum Video Resolution 1920x1080 Audio Support Yes (stereo) HDCP Compliant No Supported Number of Adapters (per system) 6 (Windows) Operating Temperature 0°C ~ 70°C (32°F ~ 158°F) Storage Temperature 0°C ~ 80°C (32°F ~ 176°F) Humidity 10% ~ 90% Dimensions (LxWxH) 109.0mm x 52.0mm x 19.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech. com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a one year warranty. In addition, StarTech.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.
