Instruction manual

USB221EXT Instruction Manual
1
Introduction
This manual is intended to assist IT professionals install the USB221EXT .
The instructions in this guide assume a general knowledge of computer
installation procedures, familiarity with cabling requirements, and some
understanding of USB devices.
NOTE : Notes give additional information that could make installation
easier.
USB221EXT Product Contents
When you open your USB221EXT for the first time you should find the
following items:
 USB221EXT User Guide
 Local unit
 Remote unit
 AC power adapter (2)
 USB cable (2m long)
To complete the installation, you will also require the following items that
are not included with the product:
 USB 2.0 compatible computer
 USB device
 Category 5 Unshielded Twisted Pair (UTP) cable with two RJ45
connectors (if using surface cabling),
OR,
Category 5 UTP cabling with two information outlets and two
Category 5 UTP patch cords with RJ45 connectors (if using
premise cabling)
NOTE : The maximum length of the Category 5 UTP cable, including patch
cords, must not exceed 165 feet (50m).
NOTE : Use only the AC adapters supplied with the USB221EXT. Use of
substitute adapters may cause permanent damage to the system and
will void the warranty.