USB 2.0 to 10/100Mbps Fast Ethernet Network Adapter Dongle USB2100 *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................2 Packaging Contents.................................................................................................................................. 2 System Requirements............................................................................................................................... 2 LED Indicators........................................................................
Introduction Packaging Contents • 1 x USB 2.0 Fast Ethernet Adapter • 1 x Driver CD • 1 x Instruction Manual System Requirements • Available USB port • Windows® 8 / 8.1 (32/64bit), 7 (32/64), Vista(32/64), XP(32/64), Windows Server® 2012, 2008 R2, 2003(32/64), Mac OS® 10.x (Tested up to 10.9), Google Chrome OS™, Linux 2.6.x / 3.x (Tested up to 3.
3. Follow the on-screen instructions to complete the installation. Note: You may be prompted to restart once the install completes. 4. Connect the adapter to an available USB port on your system. Mac OS Note: Do not connect the adapter to your system before installing the driver. 1. Insert the provided CD into your DVD/CD-ROM drive. 2. Browse to the “Mac\AX88179_178A_Macintosh_10.6_to_10.8_Driver_v1.4.0_ Binary_20130423\” folder on the disc. 3. Mount the AX88772C.dmg file, and then run the AX88772C.
2. Expand the “Network adapters” section. On a successful install, you should see the following device installed with no exclamation points or question marks. Mac OS 1. Open the System Profiler by clicking the Apple symbol in the top left corner, selecting About this Mac, then select System Report. 2. Expand the “USB” section. With the adapter connected, you should see the following device in the list.
Specifications Host Interface USB 2.0 Chipset ASIX - AX88772C Connectors 1 x RJ-45 Female 1 x USB 2.0 type A Male Maximum Data Transfer Rate USB 2.0: 480 Mbps LAN: 200 Mbps (Full-Duplex) Supported Standards IEEE802.3i, IEEE 802.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
