Datasheet

User Guide
3
The Remote Unit
The Remote Unit connects to the USB device using a conventional
USB cable. The USBthere USB110EXT allows you to connect one
full-speed or low-speed USB device. The USBthere USB120EXT
allows you to connect two full-speed or low-speed USB devices.
Front View Rear View
1
2
3
4
1
Device Port
(1 x USB Type A on
USB110EXT)
(2 x USB Type A on
USB120EXT)
2 Device LED (green)
3
Link Port (RJ45)
4 Link LED (yellow)
Network Cabling
The Local Unit and the Remote Unit are interconnected by up to 50
meters of Category 5 Unshielded Twisted Pair (UTP) cabling. The
UTP cabling must have a straight-through conductor configuration,
with no crossovers, and must be terminated with 8-conductor RJ45
connectors at both ends.
Cat. 5 cable
USB USB
Local
Remot e
cable cable
USB
device
Comput er
NOTE: Category 5 UTP cabling is the standard data communications cable
installed in most commercial and some residential buildings.