USB1000IP Instruction Manual USB Device Server 10/100/1000Mbps Gigabit 1-Port USB over IP Device Server Manual Revision:11/04/2010 For the most up-to-date information, please visit www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction............................................................................................... 1 Packaging Contents.................................................................................................. 1 System Requirements............................................................................................... 1 Side View 1................................................................................................................ 2 Side View 2...........
Introduction The USB1000IP 10/100/1000 Mbps Gigabit 1-Port USB over IP Device Server provides a simple to use, and convenient way to extend a USB device over long distances and allows for sharing that device with multiple users over your 10/100 or 1000 Mbps Ethernet network. This flexible device auto-detects network link speed and is capable of connecting through a network hub/switch/router, or directly to a PC to function as a simple USB extender.
Side View 1 Side View 2 2
Installation Hardware Installation 1. Connect the USB device that will be shared to the USB IP device server. NOTE: USB hubs are not supported by the USB IP device server. 2. Connect an RJ45 terminated Ethernet cable from the network to the USB IP device server. 3. Connect the power adapter to the USB IP device server. The green LED should light up solid and the yellow LED should blink if connected to the network.
How to Use USB Server Software Setup 1. Make sure the USB device is connected to the device server and it is powered on (if applicable). 2. Double-click the “Launch USB Server” shortcut icon on the desktop to start the program. 3. If the USB IP device server is properly connected to the network, it should appear in the list of device servers with an IP address.
the proper network settings. Consult with the network administrator if unsure how to configure. 4. The USB device connected to the device server should appear below it and list what type of device it is and it’s current status. 5. If the USB device is available, selecting it and clicking the “Connect” button will automatically link the device to the computer system, making it appear as a locally connected USB device. It can then be used as such. 6.
USB Device Status Status Description The attached USB device is ready and waiting for a connection. The USB device is on a different IP range than the computer system. The network settings need to be configured. The USB device is currently connected to the computer system. The USB device is currently connected to a different computer system and unavailable. The attached USB device is not supported by the IP device server and will not work (e.g. USB hub).
Specifications Number of Ports 1 Bus Interface USB 2.0 Chipset ID Elite Silicon E3868M1 1 x USB type A female Connectors 1 x RJ45 Ethernet female 1 x Power LEDs 1 x Ethernet Link/Activity Networking Standards IEEE 802.3-2002, 802.3ab USB 2.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech. com/support and access our comprehensive selection of online tools, documentation, and downloads. Warranty Information This product is backed by a one year warranty. In addition, StarTech.
StarTech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a diverse IT and A/V customer base that spans many channels, including government, education and industrial facilities to name just a few. We offer an unmatched selection of computer parts, cables, A/V products, KVM and Server Management solutions, serving a worldwide market through our locations in the United States, Canada, the United Kingdom and Taiwan. Visit www.startech.
