Instruction manual

3
Windows Vista/7/Server 2008 R2
1. Upon starting Windows, before plugging in the wireless
adapter, insert the included Driver CD into the computer’s CD/
DVD drive.
2. AutoPlay should automatically launch the Driver/Software
installation splash screen or prompt you to run Setup.exe. If
not, open “Computer” and right-click on the CD/DVD drive the
disk is inserted into and select “AutoPlay”.
3. Select the option to install the Driver and Utility. This should
launch the Realtek Installation wizard.
4. Complete the wizard and this should automatically install all
necessary drivers and the Realtek utility (optional to use).
Windows Server 2008 R2 Note:
By default, the Microsoft “Wireless LAN Service” Feature is not
installed. Before any wireless networking can be enabled, this
feature must be installed through the Windows Server Manager
window. Refer to Windows’ documentation for details.
Hardware Installation
1. Once the drivers are installed, plug the wireless adapter into
an available USB port.
2. Windows will automatically detect and install the adapter.
OPTIONAL: A poseable USB extension cable is included, to help
position the wireless adapter for optimal signal reception.