USB 3.0 to 2.5” SATA HDD Enclosure with ISO S2510BU3ISO *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Product Diagram.....................................................................................1 Top View........................................................................................................................................................ 1 Front View..................................................................................................................................................... 1 Introduction......................................................
Product Diagram Top View Operation LEDs Mode Button Front View USB Port Instruction Manual 1
Introduction Packaging Contents • 1x USB 3.0 to 2.5” SATA HDD enclosure • 1x Carrying Pouch • 1x USB 3.0 Cable • 1x Instruction Manual System Requirements • Computer system with available USB 3.0 port (5 Gbit/s) or USB 2.0 port (480Mbps) • 2.5” SATA hard drive or solid state drive (9.5mm height) • Microsoft® Windows® 2000/XP/Server 2003/Vista/Server 2008 R2/7/8 (32/64-bit), or Apple® Mac® OS 9.x/10, or Linux® NOTE: For ISO functionality The File System on the Hard Drive must be NTFS.
Installation Hardware Installation WARNING! Hard drives and storage enclosures require careful handling, especially when being transported. If you are not careful with your hard disk, lost data may result. Always handle your hard drive and storage device with caution.
3. Slide the back pane back into place. 4. With the enclosure fully assembled, connect the USB 3.0 cable from the enclosure to a USB port on the host computer system using the included cable.
How to Use Virtual iSO Initial Setup NOTE: For ISO functionality The File System on the Hard Drive must be NTFS. ISO function is supported on Mac and Linux based operating systems. However, the NTFS requirement limits the ISO creation to Windows based computer systems. 1. Connect the enclosure to a host computer using the included USB 3.0 cable. The native external Hard Drive drivers will be automatically installed. 2. Press the “
5. Save the desired ISO file(s) in the directory of your choice. One file per folder. 6. Press the “
Specifications Host Interface USB 3.0 External Connectors 1 x USB 3.0 female Maximum Data Transfer Rate USB 3.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
