User Manual

Instruction Manual
4
7. Follow the same procedure for either a SATA or IDE hard drive for the Destination side of
the duplicator dock.
NOTE: SATA and IDE hard drives can be mixed, so one side can be SATA while the other
is IDE.
8. Slide the power ON/OFF switch on the side of the unit to the ON position, to power up
the unit.
9. Once the unit has booted up, use the conguration buttons and built-in LCD display to
congure and operate the duplicator dock.
10. If using as an external hard drive dock, connect the USB cable from the duplicator dock to
the computer’s USB port.