Owners manual

Instruction manual
7
3. Click OK.
4. Follow any other on-screen instructions to complete the installation.
Install drivers in Windows 7
Install natively supported drivers
When the docking station is powered and connected to your host laptop, some of the
device drivers will install automatically.
You may see a pop-up message requesting permission to allow the docking station to
connect to your computer. If a pop-up message appears, do the following:
1. Click on the pop-up message.
2. Click Always Connect, in the Approve Thunderbolt™ Device Attached to Port
drop-down list.
3. Click OK.
4. Follow any other on-screen instructions.
Install Ethernet drivers
1. Download the latest driver. Use a web browser and navigate to
www.StarTech.com/TB3DK2DPPD or www.StarTech.com/TB3DK2DPPDUE.
2. Click the Support tab.
3. Download the Intel_I21x.zip driver.
4. When the download is complete, extract the contents of the compressed le that
you downloaded.
5. Navigate to the location where you extracted the driver contents, and open the
Windows folder.
6. Double-click the Setup.exe le and follow the on-screen instructions to complete
the Ethernet driver installation process.
Install USB video drivers
1. Download the latest driver. Use a web browser and navigate to
www.StarTech.com/TB3DK2DPPD or www.StarTech.com/TB3DK2DPPDUE.
2. Click the Support tab.
3. Download the Fresco_FL1100.zip driver.
4. When the download is complete, extract the contents of the compressed le that
you downloaded.
5. Navigate to the location where you extracted the driver contents.
6. Double-click the Setup.exe le and follow the on-screen instructions to complete
the USB driver installation process.