USB VGA KVM Console Extender with Serial & Audio Over Cat5 UTP SV565UTPUSA SV565USAGB *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Installation..........................................................................
Introduction The SV565UTPUSA USB VGA KVM Console Extender w/ Serial & Audio over Cat5 UTP (1000 ft) lets you control a server, workstation or multiple computers (connected through a KVM Switch) over standard Cat5 or Cat6 UTP Ethernet cable, at distances of up to 1000ft (333m) over a secure remote connection to a locked (secure) server.
Installation Front View 1 2 3 4 5 Transmitter Unit 1. DE-15 VGA In (male) 2. 3.5mm mini-jack audio In 3. 3.5mm mini-jack microphone Out 4. USB type B host connector 5. DB9 RS-232 serial (female) 1 2 3 Receiver Unit 1. DE-15 VGA Out (female) 2. 3.5mm mini-jack audio Out 3. 3.5mm mini-jack microphone In 4. USB type A peripheral connectors 5.
Rear View 1 2 3 Transmitter Unit 1. DC Power connector 2. RJ45 Link connector 3. 3.5mm mini-jack Audio Out 4. DE-15 VGA Out (female) 1 2 3 4 Receiver Unit 1. DC Power connector 2. Setup button 3. RJ45 Link Out connector 4.
Hardware Installation Transmitter Unit 1. Connect the included USB cable between the computer/KVM and the USB port on the Transmitter Unit. This also provides power to the Transmitter Unit. Optional: A 5V DC power adapter can be used for backup or if not using the USB cable. This power adapter is not included. 2. Connect a male/female VGA cable between the computer/KVM and the “Video In” VGA connector on the Transmitter Unit.
Configuration Serial Data Link The SV565UTPUSA/SV565USAGB is able to link two RS232 ports together to allow touchscreens, monitor control ports and other devices to be used remotely. The port’s baud rate is detected automatically and supports 300 to 19200 bps, with 9600 being the preferred rate. If using a baud rate other then 9600 it may take several bytes of data being sent to properly calibrate it.
times because it depends on timing. To exit the menu press X to return to data transfer mode. Commands are case sensitive. The Transmitter Unit is able to access all of the Receiver units attached to it, allowing changes to be made from a central location. Also the Transmitter Unit can change which Receiver Unit has the serial link enabled. Receiver units can change their own settings, allowing for fine-tuning to be made in the field using a laptop.
blurriness and streaking artifacts, then it is set too low. Increase it gradually until it becomes sharp and free of streaking. If it is too high then there will be problems with color patterns and noise appearing due to the high frequency components of the signal. Skew is used to compensate for the fact that each pair in a Cat5e cable can have a different length and delay. This can cause color skew in fine details like white text on a black background.
Afterwards the key will need to be re-formatted to return to normal use. To upgrade all the Receiver units and the Transmitter Unit, plug the USB key into the first Receiver Unit of the chain. If it is plugged into another Receiver Unit it will only upgrade itself. This can be used to upgrade a new Receiver Unit that has recently been added. While it is upgrading do not disconnect any cables, power off or reset any of the units. This will interfere with the process and possibly render it non-functional.
• vCtrl is too high, use manual control to decrease it • RGB color skew may also need manual adjustment • Test the Cat5 cable with a proper cable tester, to ensure cable integrity and signal throughput Blurry video or color skew • Caused by skew between color channels, can be manually adjusted • One value should remain zero, the other 2 can be adjusted up and down so all 3 color channels align up • Only needs to be changed by a small amount for fine adjustment • Test the Cat5 cable with a proper cable test
Specifications 1 x DE-15 VGA female 1 x DE-15 VGA male 1 x DB9 serial female Connectors (Transmitter Unit) 1 x USB type B female 3 x 3.5mm Audio mini-jack 1 x RJ45 Ethernet female 1 x DE-15 VGA female 1 x DB9 serial male Connectors (Receiver Unit) 2 x USB type A female 2 x 3.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
