Owner manual

Instruction Manual

Accessing the Web Interface

Once a dial-up connection has been established, you can access the Web interface or

start a VNC session using the following IP address:

https://99.99.99.99

You can now login to the Web interface (and/or VNC session) normally. Note that the

remote machine (the one you dialed from) is automatically assigned the IP address

99.99.99.100 for the PPP session. This, and the IP address of the IP KVM, cannot be

modied. The following TCP/IP port numbers are assigned for a PPP connection,

regardless of the settings congured in the Web interface for the LAN or WAN ports:

HTTPS: 443

VNC (clear-text): 5900

VNC (SSL secured): 15900

SSH: 22

Performance Notes

• All images over the PPP connection will be grayscale to conserve bandwidth. If

other users are connected while a PPP session is active, their screens will be in

grayscale as well. When PPP is inactive, color is automatically re-enabled.

• Some areas of the screen may not be updated as frequently as others, and

animations or other auto-updating areas of the screen may appear out-of-focus

or “blocky” as a result. Since the area around the mouse pointer is refreshed most

frequently, hold the pointer over an area to improve its clarity.

• It may be benecial to minimize any unnecessary icons, backgrounds or other

clutter on the host computer’s desktop to make the dial-up connection as ecient

as possible.

• If you need to congure the device over a serial connection while the modem

option is enabled, connect a serial cable (see immediately above for instructions on

what type of cable to use for the port you are accessing on the IP KVM) and begin

a terminal session following the instructions under Terminal Conguration Using a

Serial Cable in this manual. Once connected, you will see the following message:

Expecting a modem, if human, type admin password (Or start PPP)

Type the password for user admin and press Enter. The password will not appear on

the screen. The conguration menu will appear. Make the changes you wish or press q

and Enter to exit and leave the modem connection active.