Instruction manual

Instruction Manual
2
Installation
Warning: Prior to installation, please ensure that all computers and
KVM switch(es) are powered down.
Device Connection
The SV831DUSB is designed for use with both USB and PS/2 console
connections, and is equipped with two slide switch console selectors
used for the selection of USB or PS/2 modes for the mouse and keyboard
(shown below).
There are three connection patterns that correspond with the slide switch
as follows:
PS/2 Keyboard and PS/2 Mouse:1. A PS/2 Y-connector (provided) will
be required for this connection to allow both the mouse and keyboard
to be connected to the PS/2 port. The mouse and keyboard slide
switches must be switched to the left.
Keyboard
Mouse
USB
PS/2