Instruction manual

Instruction Manual
15
Left <CTRL> , Left <CTRL> 6, 3 : Selects a computer connected to port
3 of a slave connected to port 6 of the master.
To start Auto Scan, automatically scan power-on computers individually at
a fixed interval:
Left <CTRL>, Left <CTRL>, F1
When Auto Scan detects any keyboard or mouse activity, it suspends the
scanning until the activity stops. It then resumes with the next computer in
sequence. The length of the Auto Scan interval (Scan Rate) is adjustable.
To abort Auto Scan mode, press the left <CTRL> key twice.
Please Note: Scan Type determines whether an eye-marked computer is
to be displayed during Auto Scan.
Manual Scan enables you to manually switch back and forth between the
powered computers:
Left <CTRL>, left <CTRL>, F2
Press “á”, “┓ to select the previous or the next computer in sequence.
Press any other key to abort the Manual Scan.
Please Note: Scan Type determines whether an eye-marked computer is
to be displayed during Auto Scan.
To adjust Scan Rate, which sets the duration before switching to the next
computer in Auto Scan:
Left <CTRL>, Left <CTRL>, F3
The switch will beep one to four times indicating the scan interval of 3, 8,
15 and 30 seconds respectively.
To adjust keyboard typematic rate (characters/sec):
Left <CTRL>, Left <CTRL>, F4
The KVM switch beeps 1 to 4 times corresponding to 10, 15, 20 and 30
characters/second respectively.