Instruction manual

Instruction Manual
12
Auto Scan
In this mode, the KVM Switch automatically switches from one power-on
computer to the next, sequentially, in a fixed interval. During AutoScan
mode, the OSD displays the name of the selected computer.
When Auto Scan detects any keyboard or mouse activity, it suspends the
scanning until activity stops; it then resumes with the next computer in
sequence.
To abort Auto Scan mode, press the left <CTRL> twice, or, press any
front button.
Scan Type and Scan Rate set the scan pattern. Scan Type (<F4>: More\
Scan Type) determines if scanned computers must also be eye mark se-
lected. Scan Rate(<F4>: More\Scan Rate) sets the display interval when
a computer is selected before selecting the next one.
Manual Scan
Scan through power-on computers one by one by keyboard control. You
can type (<F4>: More\Scan Type) to determine if scanned computers
must also be eye mark selected.
Press the up arrow key (á) to select the previous computer and the down
arrow key (â ) to select the subsequent computer. Press any other key to
abort Manual Scan mode.
Scan Type:
Ready PC + N: In Scan mode, scan through power-on and eye mark
selected computers. Ready PC: In Scan mode, scan
through power-on computers. The non-volatile memory
stores the Scan Type setting. Scan Rate Sets the
duration of a computer displayed in Auto Scan mode.
The options are 3 seconds, 8 seconds, 15 seconds and
30 seconds. The non-volatile memory stores the Scan
Rate setting.
Ready PC: In Scan mode, scan through power-on computers.