User guide
Instruction Manual
4
Installing the Host Unit
1. Place the Host Unit near the Host computer system.
2. Switch o the computer and disconnect any connected devices.
3. Using the provided StarTech.com integrated KVM cable, connect the end of the cable
that has two (USB) or three (PS/2 + VGA) connectors to the VGA Out connector and the
USB or mouse and keyboard PS/2 connectors on the Host computer as appropriate.
(The PS/2 version of the cable is color-coded). Connect the opposite end of the cable
with a single connector to the gray-coded connector marked COMPUTER on the Host
Unit of the KVM extender.
4. If you wish to have local console access to the host computer, connect a USB mouse,
keyboard, and VGA monitor to the indicators marked as CONSOLE on the Host Unit.
5. Connect the UTP cable connection for the Remote Unit to the NETWORK RJ-45
connector on the Host Unit. Connect the opposite end to a terminated wall outlet
(if you are using premises cabling) or run it directly to the Remote Unit.
NOTE: The Host Unit can draw power from the Host computer system. If it cannot
draw sucient power from the Host computer, however, a power adapter (not
included) may be required.