User guide

Instruction Manual

Set Maximum Video Resolution

By default the KVM switch is set to output an EDID signal with a maximum video resolu-

tion of 1024 x 768 to the host computer systems. To be able to set a higher video resolu-

tion on the host computer systems, use the following command with the 4 digit code for

the maximum video resolution you wish to set.

NOTE: Do not use the numeric keypad for entering the 4-Digit Code. Only use the num-

ber keys along the top row of the keyboard.

Left <CTRL>, Left <CTRL>, V, 4 digit code

4-Digit Code Resolution 4-Digit Code Resolution

1007 1024 x 768 1609 1600 x 900

1208 1280 x 800 1612 1600 x 1200

1210 1280 x 1024 1610 1680 x 1050

1307 1360 x 768 1910 1920 x 1080

1409 1440 x 900 1912 1920 x 1200

1410 1440 x 1050

NOTE: You may need to reboot the host computer(s) for the new settings to take aect. If

not done automatically by the host computer’s operating system, you may then need to

manually adjust the display settings to the new maximum resolution.