Instruction manual

Instruction Manual
11
Using the Remote Unit
The Remote Unit allows a user at the Remote Unit to assume control of
devices connected to the Host Unit, if the Host Unit is set to Auto or Re-
mote mode, and it also permits the user seated at the Remote Unit to use
any connected system as though the KVM Extender was transparent.
You can use either keyboard shortcuts or the mode switch on the top of
the Host Unit to alternate control between A and B. Unlike the Host Unit,
however, the switch on top of the Remote unit only offers two selectable
modes:
LED Indicators
Keyboard Shortcut Command Sequences
Mode
A Indicator B Indicator
Remote Access (Computer A) On (solid) Off
Local Access (Computer B) Off On (solid)
Standard Command
With Compatibility Mode
Enabled
Description
[Ctrl] - [Ctrl] - [T] [Ctrl] - [Ctrl] - [T]
Toggles console control
between Computer A
and Computer B
[Ctrl] - [Ctrl] - [Esc] [Ctrl] - [Ctrl] - [Esc]
Cancels the hotkey
sequence
[Ctrl] - [Ctrl] - [Alt]+[E] [Ctrl] - [Ctrl] - [Alt]+[E]
Enables (2 beeps) or
disables (1 beep) Com-
patibility Mode so that
the KVM extender will
work with a KVM switch
that also uses a [Ctrl]
hotkey sequence
Local Remote