DVI USB KVM Console Extender with USB 2.0 and Audio - 500m SV565UTPDUA *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Connecting Your KVM Extender..........................................................
Introduction Packaging Contents • • • • • • 1 x Local Unit 1 x Remote Unit 2 x Universal Power Adapter 1 x USB cable 1 x DVI-D cable 1 x Instruction Manual System Requirements • • • • USB and DVI-D enabled KVM switch or computer system A DVI-D (digital) enabled display device (i.e.
Connecting Your KVM Extender Preparing Your Site Before you can install the product, you need to prepare your site. 1. Determine where the host computer will be located and set up the computer. 2. Determine where the console devices (mouse, keyboard, monitor) will be located and place them appropriately. 3.
5. Connect the UTP cable connection from the Local unit to the RJ45 connector on the Remote unit. If using premises cabling, connect the opposite end of the patch cable to the terminated wall outlet. 6. Connect the power adapters to the Local and Remote units. Each unit uses a specific power adapter (5VDC for Local, 24VDC for Remote), so ensure the correct power adapter is connected, otherwise damage may occur. 7. The “Status” LED should light up on both units to indicate power.
LEDs LEDs Description • Solid green indicates ready status. • Flashing green indicates the unit is booting up. • Off indicates no power. Status Instruction Manual Link • Solid green indicates a connection between the Local and Remote units. • Off indicates no connection between the Local and Remote units. Video • Solid green indicates a connection to the Remote unit and the Host computer. • Flashing green indicates a video signal from the Host computer is being transmitted.
Compatibility The product is compatible with many graphic cards, Operating Systems, and monitors. There is no guarantee that all devices are compatible with the product, as there are a number of different configurations that may impact the operation of the KVM Extender. The product complies with USB 1.1 and USB 2.0 specifications governing the design of USB devices.
Specifications Video Signal DVI-D (digital) Local Unit: 1 x 25-pin DVI-D female 1 x USB type B female 1 x RJ45 Ethernet female 1 x DC Power Connectors Remote Unit: 1 x 25-pin DVI-D female 3 x USB type A female 1 x RJ45 Ethernet female 2 x 3.
Local Unit: 5VDC, 3000mA, center positive Power Adapter Remote Unit: 24VDC, 1000mA, center positive ESD Protection 4kV Contact, 8kV Air Operating Temperature 0°C ~ 50°C (32°F ~ 122°F) Storage Temperature -20°C ~ 70°C (-4°F ~ 158°F) Humidity 20% ~ 80% RH Dimensions (LxWxH) 175.0mm x 112.0mm x 30.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
