KVM Console Extender over Cat5 UTP SV565UTP *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Installation..........................................................................
Introduction Packaging Contents • • • • • SV565UTP Host Unit SV565UTP Remote Unit Instruction Manual Power Adapter Set of rubber mounting feet System Requirements • Integrated KVM cable for the host and remote computers (not provided) StarTech.
Installation This product is composed of two different units: the Host Unit and the Remote Unit. The Host Unit takes input controls from a computer (using a PS/2 or USB integrated KVM cable) and allows access to them via the Remote Unit over Category 5 UTP cable. The remote computer also connects to the Remote Unit using an integrated KVM cable (again, either PS/2 or USB) and allows the user at the remote site to control that computer or the host computer using keyboard hotkey commands.
Installing the Host Unit UTP Cable PS/2 keyboard/ mouse and VGA console Host Computer (KVM cable) Power Connector 1. Place the Host Unit near the computer. 2. Switch off the computer and disconnect any existing VGA and input connections. 3. Using a StarTech.
Installing the Remote Unit UTP Cable PS/2 keyboard/ mouse and VGA console Host Computer (KVM cable) Power Connector 1. Place the Remote Unit near the computer. 2. Switch off the computer and disconnect any existing VGA and input connections. 3. Using a StarTech.
Driver Installation No driver installation is required as the SV565UTP uses standard keyboard/mouse drivers. Video Compensation Video Compensation allows the user to adjust the equalization on the Remote Unit to optimize video performance based on the length of cable being used, as well as other factors that may affect .
Using the SV565UTP KVM Extender This section details how to use your KVM extender at both the host and remote locations. Using the Host Unit The Host Unit performs two functions: it allows a user at the Remote Unit to assume control of the computer on the Host Unit (Computer A), and it also permits the user at the Host Unit to use Computer A.
Keyboard Shortcut Command Sequences Standard Hotkey Hotkey with Compatibility Mode Description [Ctrl] - [Ctrl] - [T] [Ctrl] - [Ctrl] - [T] Toggles control of Computer A between Auto, Local, Remote modes [Ctrl] - [Ctrl] - [Esc] [Ctrl] - [Ctrl] - [Esc] Cancels the hotkey sequence [Ctrl] - [Ctrl] - [Alt]+[E] Enables (2 beeps) or disables (1 beep) Compatibility Mode so that the KVM extender will work with a KVM switch that also uses a [Ctrl] hotkey sequence [Ctrl] - [Ctrl] - [E] - [1] Local Mode: Al
Standard Hotkey Hotkey with Compatibility Mode Description Privacy Setting: A. Host Unit in Local mode (LED B: Off, LED A: On) 1 beep: Reset to Factory Default. 2/3 beeps: Disable the Host Unit video output signal. B. Host Unit in Auto mode (LED A&B flashes alternately) [Ctrl] - [Ctrl] - [F6] [Ctrl] - [Ctrl] - [E] - [F6] 1 beep: Reset to Factory Default 2 beeps: Upon keyboard/ mouse activation, disables the Host Unit video output temporarily.
Beep Codes Some of the keyboard command sequences you issue to the Host Unit have multiple possible settings. The Unit will beep to indicate what setting you have selected for the command you issued. (A short beep followed by a long beep indicates an invalid command.
Using Remote Unit Like the Host Unit, the Remote Unit performs two functions: it allows a user at the Remote Unit to assume control of Computer A if the Host Unit is set to Auto or Remote mode, and it also permits the user seated at the Remote Unit to use a locally connected computer (Computer B) as though the SV565UTP KVM extender was transparent. You can use either keyboard shortcuts or the mode switch on the top of the Remote Unit to alternate control between A and B.
Standard Hotkey Hotkey with Compatibility Mode Description [Ctrl] - [Ctrl] - [E] - [1] Switches control to Computer B [Ctrl] - [Ctrl] - [2] [Ctrl] - [Ctrl] - [E] - [2] Switches control to Computer A (input allowed only if the Host Unit is in Remote or Auto mode) [Ctrl] - [Ctrl] - [F2] [Ctrl] - [Ctrl] - [E] - [F2] Toggles console control between Computer A and Computer B [Ctrl] - [Ctrl] - [F4] [Ctrl] - [Ctrl] - [E] - [F4} Adjusts the typematic rate for improved keyboard responsiveness (PS/2 keyb
Beep Codes Some of the keyboard command sequences you issue to the Remote Unit have multiple possible settings. The Unit will beep to indicate what setting you have selected for the command you issued. (A short beep followed by a long beep indicates an invalid command.
Specifications 1 x DE - 15 VGA video 2 x PS/2 keyboard/mouse Connectors (Host Unit) 1 x RJ45 port 1 x DE-15 KVM cable port 1 x DE-15 VGA video 2 x PS/2 keyboard/mouse Connectors (Remote Unit) 1 x RJ45 port 1 x DE-15 KVM cable port Maximum Distance 150m/500ft Maximum Video Resolution 1024x768 Power Adapter 9V DC, 600mA, center positive Dimensions (per unit) 75.0mm x 155.0mm x 20.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a lifetime warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
