Instruction manual

Instruction Manual

and follow the cable manufacturer’s recommendations. Fiber optic cable is often

custom designed for the installation and the manufacturer may have specic

instructions on its installation.

Installing the Computer Unit

1. Place the Computer Unit near your source PC / Server.

Note: It is recommended to leave the PC powered o until all cables are connected

and the KVM Extender has been powered.

2. Connect a USB A-B cable to the USB port on the Computer Unit, and an available

USB port on the PC / Server.

If using PS/2, connect the supplied PS/2 Y-Cable to the Computer Unit, then

connect separate PS/2 cables for keyboard and mouse to the available ports on the

PC / Server.

3. Connect an HDMI cable to the Computer Unit, and to an available HDMI Port on the

PC / Sever.

Note: If connecting a Blu-Ray player as the video source, the supported playback

resolution is 1080p/i and 720p only.

4. (Optional) If using a device that has a remote control, connect the IR Transmitter

to the port on the front of the Computer Unit and place near the sensor on your

device.

5. Connect the included power adapter to the DC jack on the Computer Unit.

6. Power on the PC / Server.