Instruction Manual

Instruction Manual
4
Operation
Front Panel
1. Online and Selected LEDs: When the LED turns green, the connected computer is
powered on. When a computer is selected, the corresponding (red) LED
will illuminate.
2. Pushbuttons: Each computer has a button associated with it on the front panel
for selection
Auto Scan
Auto Scan automatically scans through the connected computers individually, in a
xed interval
Please note: Keyboard and Mouse are not operable during Auto Scan.
To activate Auto Scan, press down the 3 and 4 buttons (on the front panel)
simultaneously. To exit Auto Scan, tap any one of the pushbuttons.
To change the Scan Time interval, press both front panel buttons
1 and 2 simultaneously.
The switch will beep 1, 2, 3 or 4 times for Scan Times of 3, 8, 15 or 30
seconds respectively.