Owner's manual

Instruction Manual
63
Storage Temperature -40°C to 65°C ( -40°F to 158°F)
Operation Temperature 0°C to 40°C (32°F to 104°F)
Humidity 80% rh, nc
Dimensions 310 x 440 x 44 mm
Weight 2200 grams (4.5 Lbs)
Electrical 100-240 V AC, 0.5 A, IEC320 socket
Frequency 50-60 Hz
• Source code for the unit operating system is available upon request. Please contact
us by phone, live chat, or email to make your request. This oer is valid for three
years from the date of purchase and/or for as long as parts or customer support
is oered for this product. Charges for the reasonable cost of copying and/or
conveying may apply
Caution
This is an IEC safety Class 1 product. Before using, the ground wire in the line cord or
the rear panel binding post must be connected for safety.
• AC Power Source
This product is intended to operate from an AC power source that will not apply
more than 250 V AC RMS between the supply conductors or between either supply
conductor or ground. A protective ground connection by way of the grounding
conductor in the power cord is required for safe operation.
• Use the proper Power Cord
Use only the power cord and connector appropriate for the voltage and plug
conguration in your country. Use only power cord in good condition Refer cord
and connector changes to qualied service personnel.
• Do Not Remove Cover
To avoid personal injury, electric shock or death, do not remove the unit cover.
• Do not operate the unit without the cover properly installed.
DISCONNECT POWER SUPPLY BEFORE SERVICING
COUPER LALIMENTATION AVANT L’ENTRETIEN