Owner's manual
Instruction Manual
25
Other identication details
These values are for information purposes only. They are visible from the VNC client
and via SNMP (if enabled).
Location
This string is sent as the system.sysLocation value over SNMP. It should describe the
location of this system.
Contact Name
This string is sent as the system.sysContact value over SNMP. It should describe who to
contact regarding this machine. Typically it includes an email address.
Network Address
This value is not used in our conguration, but is meant to store a user-dened value
that identies the controlled machine on the network. The ocial DNS name of the
controlled machine is an obvious value to put here, but you may use it for any purpose.