2 Port DVI USB KVM Switch with Audio and USB 2.0 Hub SV231UADVI SV431UADVI *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario - es.startech.com IT: Guida per l'uso - it.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com For the most up-to-date information, please visit: www.startech.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Introduction.............................................................................................1 Packaging Contents.................................................................................................................................. 1 System Requirements............................................................................................................................... 1 Installation..........................................................................
Introduction Thank you for purchasing a StarTech.com USB and DVI KVM switch. This product allows you to switch between 2 or 4 computers (depending on the model purchased) including the audio signal. Designed for today’s cutting edge systems, it features native support for USB input devices and DVI video. You can save space and improve productivity by sharing one console among multiple computers without sacrificing the quality of your digital video signal by using converters and adapters.
Installation This section details how to connect your computers to the KVM switch. For best results, ensure that all the computers to be controlled are located as close as possible to the KVM switch and console peripherals (monitor, keyboard, mouse). This will reduce the length of cabling required and reduces the chance of interference. Installing the KVM Switch 1. Place the KVM switch in close proximity to the keyboard, mouse, and monitor you wish to use as the console controls. 2.
Connecting Computers to the KVM Switch This section describes how to connect a computer you wish to control to the KVM switch. Repeat these steps for each computer you wish to connect. 1. Remove any existing keyboards, mice, monitors, speakers, and microphones from the computer. 2. Using a DVI-I or DVI-D male-to-male switchbox cable, connect one end to the video out connector on the computer. (This will be the same connector from which you disconnected the monitor in step 1, if applicable.
Using the KVM Switch Green LED (solid) = Active Computer Green LED (flashing) = No Powered Computer on that Port Red LED (solid) = Active Control of USB Hub Button = Switch control to that port The KVM switch offers two convenient ways to switch console control of the attached computers. The first is by using the buttons on the front panel to select which computer is active. The second is using keyboard hotkey combinations, which also allow you to adjust several configuration options on the KVM.
Keyboard Hotkey Command Reference Chart Command Name Hotkey Sequence Description Select active computer [ScrLk]+[ScrLk]+[x] Switches access to the computer connected to the corresponding port number on the KVM. ([x]= a number on the keyboard) Bind computer and Audio/Mic control (default) [ScrLk]+[ScrLk]+[Q] When either the select active computer or select audio/mic output control commands are executed, both functions are switched to the selected port.
Binding/Unbinding control: By default the switch will automatically switch audio control to the KVM port you select to control (bound). If you choose to “unbind” control, you can assign control of the audio to a port other than the active computer using the commands above.
Specifications Number of Ports 2 1 x DVI-I 2 x USB type A Console Connectors 1 x 3.5mm mic jack 1 x 3.5mm speaker jack Computer Connectors 2 x DVI-I (all ports) 2 x USB type B 1920x1200 (digital) Video Resolution 2048x1536 (analog) Power 5VDC, 2A Dimensions 154.0mm (6.06”) x 65.5mm (2.58”) x 27.0mm (1.
Technical Support StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads Warranty Information This product is backed by a two year warranty. In addition, StarTech.
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise. StarTech.com is your one-stop source for every connectivity part you need. From the latest technology to legacy products — and all the parts that bridge the old and new — we can help you find the parts that connect your solutions. We make it easy to locate the parts, and we quickly deliver them wherever they need to go. Just talk to one of our tech advisors or visit our website.
